10.2-meter Box-type Cargo Container

This 10.2-meter box cargo body features an external dimension of 10.2m × 2.7m × 2.7m. It is constructed with a 4mm patterned steel floor and 2mm corrugated side panels for durability and load-bearing strength. The body includes side double doors in the middle (sealed with rubber strips) and rear double doors (also sealed with rubber strips) for secure and convenient access. The lower frame uses 12CM channel steel, while the upper rails are made of 10cm rectangular tubes. The four corner posts are 60×120 square tubes, door frames use 5×10 square tubes, and intermediate posts use 8CM channel steel. Five triangular tie-down rings are installed on each side, with five floor-mounted recessed tie-down points on both the left and right. Cross members are 10CM channel steel spaced approximately 15cm apart (with optional diagonal bracing), and longitudinal beams use internally fastened 14# channel steel. The body is equipped with one central toolbox and two smaller rear toolboxes, with seven bolt-on hinges per door for robust door operation. It also features four marker lights on each side, four corner marker lights, welded seams with caulking, a standard spare tire carrier, and a 180L water tank with a sprinkler system. The finish is a new red powder coating for corrosion resistance and a vibrant appearance.